Scrap steel recycling, crushing and sorting production line

Feed width:1600mm

Production capacity:15-20t/h

Scrap steel, non-ferrous metals, lightweight metals, scrapped vehicles

Industrial Application of Scrap steel recycling, crushing and sorting production line

Scrap steel recycling, crushing and sorting production line is a processing method that uses a crusher to crush the waste metal, then uses a sorting system to sort the crushed metal, and finally obtains pure and high-quality metal. Its working principle is that under the continuous drive of high-speed and large torque motor, the rotor on the crusher blows the waste metal moving into the chamber in turn with the hammer. Under the strong impact, the waste metal is torn and extruded into broken metal of a certain specification. Finally, it is processed by the sorting equipment to obtain high-quality metal with high purity.

%e8%af%a6%e6%83%8507

%e8%af%a6%e6%83%8508-2 %e8%af%a6%e6%83%8509-2 %e8%af%a6%e6%83%8510-2 %e8%af%a6%e6%83%8511-2

Product advantages

1.The smelting cycle of scrap crushed by crusher is relatively short

The smelting cycle of the scrap crushed by the crusher is relatively short, the crushed steel is uniform, and can be smelted quickly; After processing, the chemical composition of molten steel after smelting is stable and contains low sulfur and phosphorus.
2.The recovery rate of crushed steel is greatly increased compared with that before crushing

Compared with that before crushing, the recovery rate of crushed steel is greatly improved. Due to the crushing work in the early stage, the smelting process becomes simple, and the power consumption cost per ton of molten steel is greatly reduced.
3.Reduced air pollution during crushing

The crushing process reduces impurities, so as to reduce air pollution and slag; Uniform crushing of steel can effectively increase the lining time in the furnace.

Application site of Scrap steel recycling, crushing and sorting production line

Scrap steel recycling, crushing and sorting production line is an important equipment in the metal recycling industry. It can crush large scrap steel raw materials into small pieces and improve the purity of scrap steel through the sorting system, thereby meeting the needs of subsequent processes such as steelmaking.The scrap steel recycling, crushing, and sorting production line mainly includes raw material conveying system, crushing host, transmission system, screening system, sorting system, conveying system, and dust removal system.